タグ「decontamination」
Title: A study of the staff, working in the Chernobyl zone, and residents of Slavutych (Ukraine) to identify the effects of radiation exposure from the Chernobyl fallout
Author: Brenda J. Rogers and Laura K. Baker
Reference: Department of Biological Sciences, Texas Tech University
Keywords:
Abstract: In October 1999, a research of the following four groups was conducted: 1) the liquidators of the Chernobyl accident (which were directly involved in the work on decontamination), 2) Ukrainian scientists who conducted research in the 30-km exclusion zone, and 3) U.S. scientists who worked in the exclusion zone, and 4) residents of Slavutich (Ukraine), who weren’t affected due to their profession from the Chernobyl fallout.
URL:http://www.nsrl.ttu.edu/chornobyl/rus_radiation_workers.htm
Title: Improving the efficiency of social and economical development of radioactive contaminated territories in the process of its recovery
Author: Talalushikina, Yulia Nikolayevna
Reference: Chelyabinsk, 2008
Keywords: socio-economic development, radioactive contamination, recovery (decontamination)
Abstract: The purpose of the research: to suggest ways to improve the socio-economic development of the radioactive contaminated territory based on an assessment by the developed technique of their condition within the process of its recovery.
URL:http://www.dissercat.com/content/povyshenie-effektivnosti-sotsialno-ekonomicheskogo-razvitiya-territorii-radioaktivnogo-zagry
Title: Justification, evaluation of efficiency and optimization of protection and rehabilitation measures in the territories contaminated after the Chernobyl accident
Author: Panov, Alexey Valeryevich
Reference: Obninsk, 2009
Keywords: protective measures, contaminated sites, recovery activities, agriculture
Abstract: The aim of the work was to evaluate the effectiveness of protective measures for agriculture in various stages of consequences of radiation accident liquidation and on this basis to develop the optimal ways of radioactively contaminated territories recovery.
URL:http://www.dissercat.com/content/obosnovanie-otsenka-effektivnosti-i-optimizatsiya-zashchitnykh-i-reabilitatsionnykh-meropriy
Title: Removal of Radioactive Cesium from Surface Soils Solidified Using Polyion Complex Rapid Communication for Decontamination Test at Iitate-mura in Fukushima Prefecture
Author: Hirochika NAGANAWA, Noriyuki KUMAZAWA, Hiroshi SAITOH, Nobuyuki YANASE, Hisayoshi MITAMURA, Tetsushi NAGANO, Kaoru KASHIMA, Tatsuya FUKUDA, Zenko YOSHIDA, Shun-ichi TANAKA
Reference: Transactions of the Atomic Energy Society of Japan, Released 2011/09/27
DOI: http://dx.doi.org/10.3327/taesj.J11.017
Keywords: polyion complex, decontamination of surface soil, suppression of dust release, Iitate-mura, upland field in a plastic greenhouse, pasture, paddy field, radioactive cesium
Abstract: We tried the decontamination of surface soils for three types of agricultural land at Nagadoro district of Iitate-mura (village) in Fukushima Prefecture, which is highly contaminated by deposits of radionuclides from the plume released from the Fukushima Daiichi nuclear power plant. The decontamination method consisted of the peeling of surface soils solidified using a polyion complex, which was formed from a salt solution of polycations and polyanions. Two types of polyion complex solution were applied to an upland field in a plastic greenhouse, a pasture, and a paddy field. The decontamination efficiency of the surface soils reached 90%, and dust release was effectively suppressed during the removal of surface soils.
URL:https://www.jstage.jst.go.jp/article/taesj/advpub/0/advpub_J11.017/_article
Author: O.A. Kononenko, N.M. Sorokin
Reference: Patent, 29.12.2007, Moscow patent holder: O.A. Kononenko, N.M. Sorokin
Keywords: hand, skin, decontamination
Abstract: The invention can be used for disinfection of hand from domestic, oily and radioactive contamination. It does not require any auxiliary equipment. The solution used for disinfection contains the followings: vinyl alcohol copolymer, with vinyl acetate, polydiallyldimethylammonium chloride and water in certain proportions.
URL: http://www.findpatent.ru/patent/235/2359656.html
Author: D.W. Awkers
Reference: U.S. Nuclear Regulatory commission, 2002
Keywords: decontamination, ion exchange resin, extraction
Abstract: As part of a study being performed for the Nuclear Regulatory Commission (NRC), small-scale waste specimens were collected following an AP/CAN-DEREM full-system decontamination of the reactor vessel of the Indian Point 2 reactor vessel in March 1995. CAN-DEREM is a modified version of a reduction process developed by Atomic Energy of Canada Ltd. for that country’s heavy-water CANDU reactors. The INEEL research was undertaken to support licensing needs for reviewing radiological and chemical data and information to address uncertainties associated with disposal of low-level radioactive decontamination waste in performance assessment modeling. This report presents information on radionuclide and chelate characteristics of decontamination radwaste on ion-exchange resins. The information is expected to reduce uncertainties associated with developing radionuclide inventories for the performance assessment.
URL: http://www.nrc.gov/reading-rm/doc-collections/nuregs/contract/cr6766/cr6766.pdf
Author: V.I. Boiko, I.D. Brus, V.A. Vlasov, V.P. Dmitrienko, I.I. Zherin, V.V. Lazarchuk, N.S. Turayev
Reference: Patent, 18.06.2007, Tomsk patent holder: Tomsk Polytechnic University
Keywords: decontamination, nuclear fuel cycle, nuclear submarine, gaseous medium
Abstract: The invention relates to nuclear technology and can be applied for decontamination of equipment in nuclear fuel cycle and nuclear submarines. As for the method, an enclosed space is used, into which placed the equipment, to be decontaminated, and the space is filled with chemically active gasous medium. The process is the following: enclose space; emit a part of air; fill the space with saturated vapor and chlorine, up to a certain pressure; keep the condition for 24 hours. Then, the chlorides, formed on the contaminated surfaces, are removed by spray for further recycle.
URL: http://www.findpatent.ru/patent/234/2341837.html
Author: Yu.P. Kudryavsky, Yu.A. Ryaposov, O.V. Rakhimova I.N. Lipunov, A.S. Teplounov, S.A. Onorin, M.V. Zilberman, N.K. Zhulanov, I.Yu. Eremin, N.I. Polezhaev, A.I. Medvedev
Reference: Patent, 28.04.2003, Berezniki paten holder: Research-production environmental company “Eco-technology”
Keywords: radioactive waste, decontamination
Abstract: The invention relates to chemical technology, namely to technology of nonorganic materials. It can be used for deactivation and decontamination of radioactive waste, from industries, containing Th-232 and daughter products of its decay (Ra-228, Ra-224), as well as REM, Fe, Cr, Mn, Al, Ti, Zr, Nb, Ta, Ca, Mg, Na, K, etc. The method contains dissolving of the waste, process of solutions or slurry of barium chloride, with acid and lime milk, and separation of precipitate from the solution.
URL: http://www.findpatent.ru/patent/224/2246772.html
Author: V.I. Gusarov, V.V. Prozorov, A.A. Lysenko, Yu.I. Slepokon, V.A. Doilnitsyin, A.V. Oblogin, A.N. Bukreyev
Reference: Patent, 27.12.2002, Sosnovyi Bor patent holder: Kursk atomic station
Keywords: internal surfaces, circuit, decontamination, nitric acid solution
Abstract: The invention relates to nuclear power engineering, and can be applied for removal of radioactive contamination from internal surfaces of circuit of nuclear power plants. The method includes treatment of energy equipment, using nitric acid solution (45-100ml/l) at a temperature of 80-100C for 5-17 hours.
URL: http://www.findpatent.ru/patent/219/2195728.html
Author: A.P. Vasilyev, M.E. Netecha, B.P. Frolov, G.A. Khacheresov
Reference: Patent, 27.07.2001, Moscow patent holder: State Unitary Enterprise “Research and Development Institute of Power Engineering”
Keywords: metallic surface, decontamination, electric arc discharge, granulation in water
Abstract: The invention relates to nuclear technology and can be applied for decontamination of metallic surfaces of equipment in nuclear power plants. The material, with metallic surface contamination, is placed in a container; Movable electrode, with gap according to the contaminated surface, is installed; Connect the material and the electrode to the terminals of pulse generator. Then water is poured into the gap and the electric arc is ignited. The high temperature, caused by the arc, melts the metallic surface. Under the force of the electro-shock, occurs a quenching of the discharge, wherein the molten metal is ejected out of the hole and granulated in cold water.
URL: http://www.findpatent.ru/patent/217/2171511.html